DME Wipe Settings for Independent Key Transitions

You carry out independent key transition DME wipe setting operations using the DME Wipe Adjust menu for each keyer.

For an overview of independent key transitions, see page 35.

This section describes the independent key transition DME wipe settings, taking the M/E-1>Key1>Transition>DME Wipe Adjust menu as an example.

Basic Procedure for Independent Key Transition DME Wipe Settings

Accessing the independent key transition DME wipe settings menu

As an example, to access the M/E-1>Key1>Transition>DME Wipe Adjust menu, carry out the following operation.

• In the menu control block, select the top menu selection button [M/E 1], and select VF1 ‘Key1’ and HF6 ‘Transition’ to display the Transition menu for key 1. Next, press [DME Wipe Adjust].

Carrying out the above operation displays the M/E-1>Key1>Transition>DME Wipe Adjust menu (which will be referred to below as simply the Key1 DME Wipe Adjust menu).

Selecting the independent key transition DME wipe pattern

You select the independent key DME wipe pattern from the list of patterns displayed in the menu.

Note

For an independent key transition, only the slide, split, squeeze, door, frame in/ out, and user programmable DME patterns are available.

To select a DME wipe pattern for independent key1 on the M/E-1 bank, use the following procedure.

Wipes DME 6 Chapter

DME Wipe Settings for Independent Key Transitions 339