Key Priority Setting
You can select the key priority, that is, the order in which the keys are laid over each other, in the current video and after the transition. There are two ways of setting the priority: either using the [PRIOR SET] button in the transition control block, or using the Misc menu to access the Key Priority menu for the M/E or PGM/PST bank.
Setting the Key Priority in the Transition Control Block
The positions of the buttons used for the operation are as follows.
|
| ON | ON | ON | ON |
Next transition |
| 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 | |||
|
|
|
|
| |
selection buttons | BKBD | KEY1 | KEY2 | KEY3 | KEY4 |
KEY PRIOR button | PRIOR |
|
|
| MIX |
| KEY | MIX |
| NAM | SUPER |
|
|
|
| ||
|
| PST |
|
|
|
| ALL | COLOR |
| WIPE | DME |
|
| MIX |
|
|
|
PRIOR SET button | PRIOR | NORM | NORM | REV | TRANS |
| SET |
| /REV |
| PVW |
|
|
|
| AUTO | CUT |
|
|
|
| TRANS | |
|
|
|
|
|
PTN LIMIT
LIMIT SETKF
Transition control block (standard type)
Changing the currently inserted key priority
Use the following procedure.
1 If the next transition selection button [KEY PRIOR] is on, press another next transition selection button to turn the [KEY PRIOR] button off.
(When the [KEY PRIOR] button is on, the transition control block switches to the mode for changing the key priority for after the transition.)
Transitions 3 Chapter
Key Priority Setting 227