Memory Frame 7 Chapter

Note

All freeze images written to temporary memory are lost when the system is powered off.

Saving a processed image

To save a processed image as a file, in the Edit>Composite menu use the following procedure.

1 Press [Store].

The keyboard window appears.

The default file name, “image###” (where ### is a three-digit number) is input.

2 In the keyboard window, enter the file name (maximum 8 characters).

3 In the keyboard window press the [Enter] button.

This saves the freeze image as a file in memory.

Selecting the way in which images are combined

To select the way in which the background image and input signal are combined (see page 75), use the following procedure.

1 In the <Type> group of the Edit>Composite menu, select one of the following methods of combination.

•Pattern Key: pattern key

•Ext Key: external key

(This can only be selected when the pair mode is enabled. The signal selected on the frame memory source 2 bus is used as the key signal.)

•Mix: mix

•NAM: non-additive mix

If none of the above is selected, image combination is not carried out.

2 Depending on the selection in step 1, set the following parameters.

• When [Pattern Key] is selected

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Size

Size of pattern

0.00 to 100.00

 

 

 

 

2

Soft

Edge softness of pattern

0.00 to 100.00

 

 

 

 

3

Pattern

Pattern number

1 to 24 a)

a)The patterns are the same as for a standard wipe. See the appendix “Wipe Pattern List” (Volume 2).

358 Frame Memory Operations