Panel Control and Menus 2 Chapter

In the description of specific setting procedures, the knob adjustment is described, as follows.

Example: When wipe pattern key is selected

Knob

Parameter

Adjust-

Setting values

 

 

ment

 

 

 

 

 

1

Size

Pattern

0.00 to 100.00

 

 

size

 

 

 

 

 

2

Soft

Edge

0.00 to 100.00

 

 

softness

 

 

 

 

 

3

Density

Key

0.00 to 100.00

 

 

density

 

 

 

 

 

When the [MENU] button in the device control block is lit, you can use the trackball and Z-ring to control the parameters.

•Move the trackball on the x-axis to control the parameter for knob 1 or on the y-axis to control the parameter for knob 2. Moving up or to the right increases the parameter value, and moving down or to the left decreases the parameter value.

•Use the Z-ring to adjust the parameter for knob 3. Turning clockwise increases the parameter value, and turning counterclockwise decreases the parameter value.

Going back to the previous menu To return to the last displayed menu, press the previous page button.

Numeric keypad window

1Item display

2Max./min. value indication

3 Input value

4 Close button

5 TC (timecode) button

6 − (minus)

button

7 Clear button

8 Trim button

9 Enter button

aItem display

This is the name of the parameter being set in the numeric keypad window.

bMax./min. (maximum/minimum) value indication

This shows the maximum and minimum settings of the parameter.

cInput value

This is the value being input into the numeric keypad window.

dClose button

This closes the numeric keypad window.

eTC (timecode) button

When the numeric keypad window is opened for a setting requiring a timecode value to be entered, this button appears in a depressed state.

218 Basic Menu Operations