Functions
Making the adjustments
Adjust VIDEO GAIN, Y GAIN, BLACK LEVEL, C GAIN, and HUE DELAY in the following menus.
Applicable bus |
| Menu used for operation | See page |
|
|
|
|
Key fill buses for keys | |||
banks | 1 to 4 |
|
|
|
|
|
|
| background A and B | Video Process menu | |
| buses |
|
|
|
|
|
|
| Utility 1 and 2 buses |
|
|
|
|
|
|
PGM/PST bank | Key fill buses for | PGM/PST menu | |
| DSK1 to DSK4 |
|
|
|
|
|
|
| Background A and B | Video Process menu | |
| buses |
|
|
|
|
|
|
| Utility 1 and 2 buses |
|
|
|
|
|
|
Frame memory source 1 and 2 buses | Frame Memory menu | ||
|
|
|
|
Aux 1 to 48 buses |
| AUX/MON menu | |
|
|
|
|
Video Process Memory
When using video process adjustments for an image effect on a bus, this function saves the final values for each pair number for the signals. The video process on/off setting is not saved.
When you change the adjustments the values are automatically saved, and these last values are recalled when the pair number is selected.
In other words, by switching video process memory on, regardless of the video process information for each bus, you can carry out video process adjustments for each input signal.
The parameters saved are as follows.
VIDEO GAIN, Y GAIN, BLACK LEVEL, C GAIN, HUE DELAY
Switch the video process memory on or off in the Setup menu.
For details of setting operations, see “Settings Relating to Keys, Wipes and Frame Memory (Key/Wipe/FM Menu)” in Chapter 16 (Volume 2).
84 Video Process