Using the key processed keyer signals or signals to which a DME effect is applied in frame memory (frame memory feed)
To use the key processed keyer key fill and key source signals on the frame memory source buses, in the Processed Key menu, press [FM Feed]. [Ext Proc Key] turns on, and the key fill and key source signals processed on the currently selected keyer are automatically assigned to frame memory source buses 1 and 2. When a DME is selected on the keyer, the key fill and key source signals to which a DME effect is applied are assigned.
Blink Function
With the blink function, you can obtain the following effects.
Key blink: The key is alternately inserted and deleted at regular intervals. You can set the period of blinking, and the proportion of each cycle for which the key is inserted.
Edge blink: The key fill and key edge fill signals are interchanged at regular intervals. You can set the period of blinking, and the proportion of each cycle for which the original state holds.
Using the blink function
For example, to make the required settings for key 1 on the
1 In the
The Transition menu appears.
2 In the <Blink> group, select [Key Blink] or [Edge Blink] to set it on.
3 Set the blink parameters.
• When key blink is selected
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Blink Rate | Length of blink cycle | 1 to 100 |
|
|
|
|
2 | Duty | Proportion of cycle for which key | 0.00 to 100.00 |
|
| inserted |
|
|
|
|
|
• When edge blink is selected
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Blink Rate | Length of blink cycle | 1 to 100 |
|
|
|
|
Keys 4 Chapter
Key Setting Operations Using Menus 285