Carrying out a color mix for the edge fill matte

When you selected [Matte] for the border or soft border edge fill, you can combine color 1 and color 2.

For the combination, you can use not only a normal wipe generator pattern, but also the dedicated color mix pattern.

Use the following procedure.

1 In the <Edge Fill> group of the Edge/Direction menu, select [Matte], and press [Matte Adjust].

The Matte Adjust menu appears.

2 In the <Edge Matte> group, select [Mix Color], turning it on.

3 In the <Mix Pattern> group, make one of the following selections.

Wipe: Use the wipe pattern selected for the transition.

Pattern: Use the dedicated pattern.

4 Depending on the selection in step 3, set the following parameters.

• When Wipe is selected

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Size

Pattern size

0.00 to 100.00

 

 

 

 

2

Soft

Edge softness

0.00 to 100.00

 

 

 

 

• When Pattern is selected

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Size

Pattern size

0.00 to 100.00

 

 

 

 

2

Soft

Edge softness

0.00 to 100.00

 

 

 

 

3

Pattern

Pattern number

1 to 24 a)

a)The patterns are the same as for a standard wipe. See the appendix “Wipe Pattern List” (Volume 2).

If you selected Pattern, you can also carry out the pattern selection by pressing the [Mix Ptn Select] button in the Matte Adjust menu, to display the Mix Ptn Select menu. Select any pattern appearing in the Mix Ptn Select menu (standard wipe patterns 1 to 24) by pressing the appropriate button, and you can then adjust the following parameters.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Size

Pattern size

0.00 to 100.00

 

 

 

 

2

Soft

Edge softness

0.00 to 100.00

 

 

 

 

Wipes 5 Chapter

Basic Procedure for Wipe Settings

313