Keys 4 Chapter
If a DME is selected on the currently selected keyer, then the key fill and key source signals to which a DME effect is applied are assigned to frame memory sources 1 and 2.
Carrying out a frame memory feed causes the [PROC KEY] button to light amber.
Using the show key function
While the [SHOW KEY] button is held down, the
Even when the [SHOW KEY] button is released, for a preset time the show key mode is maintained. You can specify the output to which the show key function is applied and set the time for which the show key mode is maintained after releasing the button in a Setup menu.
For details see “Settings Relating to Keys, Wipes and Frame Memory (Key/ Wipe/FM Menu)” in Chapter 16 (Volume 2).
Using the auto delegation function
To couple the selection in the key delegation buttons of the independent key transition control block so that the key control block delegation selection is automatically switched, in the key control block press the [AUTO DELEG] button, turning it on.
Returning the key adjustment values to their defaults
Holding down a key type button ([LUM], [LIN], [CRK], [CVK], or [KEY WIPE]) recalls the key default values (page 55).
Key modify clear
When an M/E delegation button is held down, holding down a key delegation button together returns the key settings to the initial status settings.
For details of the initial status, see “Selecting the State After Powering On (Start Up Menu)” in Chapter 16 (Volume 2).
298 Key Setting Operations With the Key Control Block