Panel Control and Menus 2 Chapter

cIndependent key transition execution section

DSK1 (downstream key 1) ON to DSK4 ON buttons: Press these to instantaneously cut the downstream keys 1, 2, 3, and 4 in or, when the downstream keys are already inserted, cut them out. When the key corresponding to the button appears in the final program output, the button lights red, and otherwise lights amber.

TAKE buttons: These correspond to downstream keys 1, 2, 3, and 4 from left to right; press to execute an auto transition. The transition starts immediately, and the button lights amber. When the transition completes, the button goes off.

Fader lever: Move this to carry out a manual downstream key transition.

Transition indicator: This comprises 30 LEDs, which show the progress of the downstream key transition.

dKey snapshot setting buttons

K-SS (key snapshot): This enables key

snapshot mode.

K-SS STORE (key snapshot store): To save a key snapshot, hold down this button, and press the [key source name display/key snapshot] button for the register you want to save.

UNDO (key snapshot recall undo): This undoes the last key snapshot recall.

eKey source name display/key

snapshot buttons

These display the selected source name for each corresponding keyer. In snapshot mode, they correspond to registers 1 to 4 of the selected keyer, and pressing the button saves or recalls a key snapshot.

206 Names and Functions of Parts of the Control Panel