You can enter a timecode value in the range that depends on the signal format (page
146)as follows:
00:00:00:00 to 23:59:59:nn, where nn = (number of frames per second) – 1.
f– (minus) button
This toggles the sign of the entered value. When it is pressed, the value is negative.
gClear button
This clears the input. It does not change the parameter setting.
hTrim button
After entering the difference from the current value, press this button to confirm the numeric input.
iEnter button
This confirms the entered value.
Panel Control and Menus 2 Chapter
Basic Menu Operations 219