Output signal settings (Output)

•Output Assign: Assign the signals output from the Output1 to 48 ports.

•Video Clip: Adjust the clip levels (White Clip, Dark Clip, and Chroma Clip) for the output signals from each of the Output1 to 48 ports.

•V Blank: Adjust the vertical blanking width for the output signals from each of the Output1 to 48 ports. The setting is the number of scan lines from the reference blanking position of field 1 for the particular format which should be masked.

•Through Mode: Enable or disable through mode. Through mode can be enabled for AUX1 to 48 outputs, M/E and PGM/PST program outputs, and clean output.

•Safe Title: Enable or disable safe title, and carry out settings for box 1 and 2 and cross.

•Ref. Output Phase: Set the reference output mode and phase adjustment.

Settings relating to video switching (Transition)

•Transition Preview: Specify the operation mode for transition preview for each of the M/E and P/P banks.

•Key Transition: Specify the operation mode for independent key transitions.

•Bus Toggle: Switch the bus toggle for each of the M/E and P/P banks on or off.

•Split Fader: When the bus toggle is off, the split fader settings are enabled. For each of the M/E and P/P banks, select enable or disable.

•Fade To Black: Enable or disable fade-to-black for each final program output.

•Preset Color Mix: Set the stroke mode for a preset color mix, the key status for a transition including a key, and the mode in which the transition type after a transition ends returns to the previous setting.

•Transition Curve: Set the relationship when carrying out a transition, between the fader lever position and the advancement state of the transition.

Key, wipe and frame memory settings (Key/Wipe/FM)

•Key Memory: Set the key memory operation mode for each of the M/E and P/P banks.

•Video Proc Memory: Enable or disable video process memory.

•Show Key: Enable or disable show key for edit preview, M/E and P/P Pvw/ K-Pvw.

•DSK Auto Drop: Specify a DSK to be turned off automatically when a cross-point button on the P/P program bus is pressed.

•Mask/Border Process: Set the processing order of masks and borders for each M/E and P/P bank.

•Key Priority: Set the key priority operation mode for each of the M/E and P/P banks. In DSK mode, the key priority is fixed.

Functions 9000-DVS 1 Chapter

Setup 153