Functions 9000-DVS 1 Chapter

 

 

Main pattern at 100%

Parameter settings

 

 

 

Start: Point in the course of the

 

 

 

Sub pattern at 100%

transition at which the main pattern

 

 

is at 100%

 

 

 

 

 

 

 

End: Point in the course of the transition

 

 

 

 

 

 

at which the sub pattern is at 100%

 

0.00

 

 

 

100.00

 

 

 

 

 

 

Transition (0.00 - 100.00)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Start

 

 

 

Mix combination of

Mix ends during

End

 

 

 

transition, which

value

 

 

 

main and sub

value

 

 

 

ends with sub

 

 

 

 

patterns already

 

 

 

 

 

pattern at 100%

 

 

 

 

 

begun

 

 

 

 

 

 

 

 

 

 

 

 

 

–10.00

 

 

 

 

 

 

 

 

 

 

 

 

90.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Begins with main

Ends with sub

 

 

 

 

 

 

 

 

 

pattern at 100%

pattern at 100%

 

0.00

 

 

 

 

 

 

 

 

 

 

 

 

100.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Transition ends

 

 

 

 

 

 

 

 

 

 

 

Mix begins after

with main and

 

 

 

 

 

sub patterns

 

 

 

 

 

transition starts

still in mix

 

 

 

 

 

 

 

combination

 

10.00

 

 

 

 

 

 

 

 

 

 

 

 

110.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A value of 0.00 corresponds to the beginning of the transition, and a value of 100.00 to the end of the transition.

A negative Start value signifies that the main and sub patterns are already combined when the transition starts.

An End value of 100.00 or more signifies that the main and sub patterns are still combined when the transition complete.

If the Start and End values are the same, the main and sub patterns are interchanged instantaneously at the corresponding point in the transition.

If End is less than Start, as the transition proceeds, it changes from the sub pattern to the main pattern.

Dust mix

You can apply the effect of a diamond dust wipe to a selected pattern. You can also apply the diamond dust wipe effect to the pattern resulting from a pattern mix. (See “Pattern Mix” (page 307).)

When the pattern mix function is off, turning dust mix on results in the main pattern and the diamond dust pattern being mixed. This state is the same as a pattern mix when the diamond dust pattern is selected for the sub pattern.

58 Wipes