Functions 9000-DVS 1 Chapter

•Shift Mode: For the [SHIFT] button in the cross-point control block, select the mode in which this is a shift button dedicated to the source display section, or the mode in which it is a shift button for all buses.

•Name Export: This function sends the source name and destination name to the S-BUS.

AUX bus settings (Aux Assign)

•Aux Assign: Assign the AUX delegation buttons in the auxiliary bus control block to any bus.

•Shift Mode: Specify whether the rightmost button of the AUX delegation buttons is used as a shift button, and when it is used as a shift button, the operation mode.

Button assignment settings (Prefs/Utility)

Assign the [PREFS 1] to [PREFS 8] buttons in the menu control block, and the utility/shotbox control block buttons.

•User Preference: Make the settings for the user preference buttons in the menu control block. This assigns recalling frequently used menus (menu shortcuts), enabling/disabling functions (recalling utility commands) and recalling shotbox registers.

•Utility Module Assign: Make the utility/shotbox control block settings. This assigns recalling frequently used menus (menu shortcuts), enabling/ disabling functions (recalling utility commands) and recalling shotbox registers.

External device connections (Device Interface)

•GPI Input: Set the GPI input ports and trigger type, and make the action settings.

•GPI Output: Set the GPI output ports and trigger type, and make the action settings.

•P-BUS Control: Set the control mode for P-BUS devices.

•DCU Serial Port Assign: Assign the devices (DDR/VTR) connected to a DCU and accessible from the control panel to the DEV1 to DEV12 buttons of the control panel. For a DDR, you can also make settings relating to sharing of file lists.

Operation settings (Operation)

•Button Tally: Set whether or not the system tally generation results are reflected in the panel tally.

•Trans Rate Display: Select whether the transition rate display mode is in frames or timecode units.

•Effect: For keyframe effects, you can make the following settings. (See Chapter 13 “Keyframe Effects” (Volume 2).)

150 Setup