Memory Frame 7 Chapter
4 If in step 2 you set [Pair] to be off, press the target FM selection button [FM1] or [FM2] (see page 349) to select the FM operations apply to.
When [Pair] is on, whichever of FM1 and FM2 you press, the pair is selected. When off, it is necessary to select which the operations apply to.
Capturing an Image (Freeze)
Freezing an image and writing it to memory
To freeze the signal selected as input material, and write it to memory, use the following procedure.
1 In the Frame Memory menu, select VF2 ‘Edit’ and HF1 ‘Freeze.’
The Freeze menu appears.
2 Select the target frame memory.
For the procedure, see “Selecting outputs (FM) and target frame memory” (page 351).
3 To enable V/K mode, press [V/K Mode] turning it on. 4 Press [Freeze Enable], turning it on.
A freeze is now possible.
5 If necessary, make the video process settings (see page 353) or mask settings (see page 354) for application to the selected signal.
6 In the state in which you want to freeze, press one of the following in the <Freeze> group, to write the freeze image to temporary memory.
Frame: Freeze one frame.
Field: Freeze one field.
Off: Release the freeze, and delete the recorded freeze image.
After carrying out the freeze, to return to the state immediately before the freeze, press [Undo] in the <Freeze> group.
Notes
•All freeze images written to temporary memory are lost when the system is powered off.
•If you change the frame memory to use as in step 2 before saving the freeze images written to temporary memory, all the freeze images in
352 Frame Memory Operations