3 Set the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Width | Width of the slits | 1 to 128 (integer) |
|
|
|
|
2 | H Offset | Spacing in the horizontal direction | −100.00 to +100.00 a) |
3 | V Offset | Spacing in the vertical direction | −100.00 to +100.00 a) |
a) See page 64.
Applying modulation to the wipe pattern (Modulation)
You can apply modulation independently to the main pattern and sub pattern. Use the following procedure.
1 In the
The Main Modify menu appears.
2 Depending on the desired effect, in the <Modulation> group select one of the following.
H:Modulate the pattern, applying waviness in the horizontal direction to edges.
V:Modulate the pattern, applying waviness in the vertical direction to
edges.
Fringe: Modulate the pattern, applying waviness in the radial direction to edges.
3 Set the following parameters.
.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Amplitude | Amplitude of modulation | 0.00 to 100.00 |
|
|
|
|
2 | Frequency | Frequency of modulation | 0.00 to 100.00 |
|
|
|
|
3 | Speed | Speed of waves | −100.00 to +100.00 a) |
4 | Shape | Form of the modulation | 1 to 3 b) |
a)See page 65.
b)See page 65.
Applying barrel or pincushion distortion to the edge of the wipe pattern (Spring)
You can set the spring function independently for the main and sub patterns. Use the following procedure.
Wipes 5 Chapter
Basic Procedure for Wipe Settings | 319 |
|
|