Independent Key Transitions
Transitions 3 Chapter
Key source name display/key snapshot buttons
Key delegation buttons | KEY1 | KEY2 | KEY3 KEY4 | EMBL | |
|
|
|
|
| |
Independent key transition type | MIX | WIPE | DME | ENBL | STORE |
|
|
|
|
selection buttons
| KEY1 | KEY2 | KEY3 | KEY4 |
| ON | ON | ON | ON |
Independent key transition |
|
|
|
|
execution section | TRANS | TRANS | TRANS | TRANS |
| AUTO | AUTO | AUTO | AUTO |
Independent key transition control block (standard type)
To set independent transitions for the keyers on the M/E or PGM/PST bank, use the independent key transition control block.
For an overview of the independent key transitions, see page 35.
Basic Independent Key Transition Operations
In the independent key transition control block, use the following procedure.
1 Select one or more of the delegation buttons [KEY1] to [KEY4] ([DSK1] to [DSK4] in the PGM/PST bank), turning them on.
2 Select the transition type.
To fade a key in or out: Press the [MIX] button, turning it on.
To insert or delete a key using a dedicated wipe pattern: Press the [WIPE] button, turning it on.
To insert or delete a key using a dedicated DME wipe pattern: Press the [DME] button, turning it on.
If, in the Setup menus, you set insertion and deletion as independent modes, make the settings for the next transition in the independent key
248 Independent Key Transitions