Key Edge Modifications

To apply a modification to the key edge, press one of the edge type selection buttons in the key control block.

[BDR] button: border

[DROP BDR] button: drop border

[SHDW] button: shadow

[OUTLINE] button: outline

[EMBOS] button: emboss

For an overview of the edge modifications, see page 50.

The pressed button lights green, and you can now adjust the parameters with the knobs. The display beside each knob shows the first letter of the parameter name and the three-digit setting value.

Setting the border parameters

When the [BDR] button is lit green, the parameter settings depend on the key type and whether the separate edge function is active. To activate the separate edge function, press [Separate Edge], setting it on, in the Edge menu for the key.

Separate edge off

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Width

Border width

0 to 8 a)

 

 

 

(0 to 100) b)

4

Density

Border density

0 to 100

 

 

 

 

a)In the “4H mode” and when [Fine Key] (page 276) is on, the setting value range is 0 to 4.

b)When a wipe pattern key or key wipe pattern key is selected as the key type

Separate edge on

The border width settings can be made independently for left, right, top, and bottom sides. The separate edge function is only available when luminance key, linear key, or chroma key is selected as the key type.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Top

Top edge width

0 to 8 a)

2

Left

Left edge width

0 to 8 a)

3

Right

Right edge width

0 to 8 a)

4

Bottom

Bottom edge width

0 to 8 a)

a) In the “4H mode” and when [Fine Key] (page 276) is on, the setting value range is 0 to 4.

Keys 4 Chapter

Key Setting Operations With the Key Control Block

291