Keys 4 Chapter

Auto Select: The signal allocated, being paired with the key fill bus signal, to a cross-point button is automatically selected as the key source. The setting of key fill and key source pairs is carried out in the Setup menu. (See “Cross-Point Settings (Xpt Assign Menu)” in Chapter 16 (Volume 2).)

Split: You can select a key source signal independently of the key source automatically selected in Auto Select mode.

6 When [Split] was selected in step 5, hold down the [SPLIT] button in the key control block, then in the cross-point control block key 1 row, select the key source signal.

Note

When [Split] is selected, the key memory function (see page 54) is disabled.

Carrying out a color mix for key fill

When [Matte] is selected for key fill, you can combine color 1 and color 2. For the combination, you can use not only a key wipe generator pattern, but also the dedicated pattern for key edge color mix.

Use the following procedure.

1

In the <Key Fill> group of the Type menu, select [Matte] and press [Matte

 

Adjust].

 

 

 

 

The Matte Adjust menu appears.

 

2

Select [Mix Color] in the <Fill Matte> group.

 

3

Adjust the following parameters.

 

 

 

 

 

 

 

Knob

Parameter

Adjustment

Setting values

 

 

 

 

 

 

1

Size

Pattern size

0.00 to 100.00

 

 

 

 

 

 

2

Soft

Softness of the edge of the

0.00 to 100.00

 

 

 

pattern

 

 

 

 

 

 

4 Select the combining pattern in the <Mix Pattern> group.

Key Wipe: The wipe pattern selected for an independent key transition is used for combination.

Edge Pattern: Combine using the dedicated pattern selected for the color mix in the key edge fill.

For details, see “Carrying out a color mix for the key edge fill matte” (page 277).

272 Key Setting Operations Using Menus