•When setting [Window] on and adjusting the detection range of the color cancel key
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Crop | Crop value | 100.00 to 0.00 |
|
|
|
|
2 | Angle | Angle value | 180.00 to 0.00 |
|
|
|
|
For details of the crop and angle parameters, see “Chroma key window” (page 48).
•When setting [Y Balance] on and adjusting the ratio in which Y balance is added to the color cancel key
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Mixture | Ratio of Y balance key | 0.00 to 100.00 |
|
|
|
|
Adjusting the window
Setting the window function on allows you to adjust the detection range used to determine the key signal. When this function is off, the default range is used for the key.
For an overview of the window, see “Chroma key window” (page 48).
After making sure that the values of Clip, Gain, and Hue are adjusted appropriately, use the following procedure to make the window adjustment.
1 In the Chroma Adjust menu, set [Window] on.
2 Adjust the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Crop | Crop value | 100.00 to 0.00 |
|
|
|
|
2 | Angle | Angle value | 180.00 to 0.00 |
|
|
|
|
Adjusting the Y balance
Setting the Y balance on allows you to specify that, even if the hue is the same, only portions of a particular luminance will be replaced by the background.
For an overview of the Y balance, see page 49.
Use the following procedure.
1 In the Chroma Adjust menu, set [Y Balance] on.
Keys 4 Chapter
Key Setting Operations Using Menus 269