Functions 9000-DVS 1 Chapter

Pre-macro:Mode in which the button function is executed after macro execution has completed

Post-macro:Mode in which the macro is executed after carrying out the button function

Macro only: Mode in which the button function is not executed, and the macro only is executed

You can assign any one of the 99 macro registers to a button.

For a button whose function is switched by delegation, you can make a separate macro attachment for each function.

For each control panel, you can make up to 1000 macro attachment settings.

Notes

•The buttons for which a macro attachment can be made are the background A and background B rows of buttons in the PGM/PST bank and the M/E banks only.

•After setting a macro attachment for a cross-point button, if in setup you change the function assigned to that button (see “Cross-point button settings (Xpt Assign)” (page 149)), the macro attachment may be canceled.

Enabling and disabling macro attachment

You can temporarily disable the macro attachment settings. When a macro attachment is disabled, pressing the button does not cause execution of the assigned macro.

You can enable and disable macro attachments for the PGM/PST bank and M/ E banks individually.

Clearing the macro attachments

You can clear all of the macro attachments in a single operation.

162 Macros