Wipes 5 Chapter

Basic Procedure for Wipe Settings

You carry out wipe setting operations principally using the Wipe menu for each of the M/E-1 to M/E-3 and PGM/PST banks.

This section describes the basic procedures for wipe settings, taking the M/E- 1> Wipe menu as an example.

For details of independent key transition wipe settings, see “Wipe Settings for Independent Key Transitions” (page 322).

Wipe Settings Menu

Accessing the wipe settings menu

To access the M/E-1> Wipe menu, use any of the following operations.

•In the menu control block, select the top menu selection button [M/E 1], and press VF5 ‘Wipe.’

•In the transition control block of the M/E-1 bank, press the transition type selection button [WIPE] twice in rapid succession.

•In the Flexi Pad control block of the M/E-1 bank, press the [WIPE] button

twice in rapid succession.

Any of the above operations displays the M/E-1>Wipe menu.

Wipe Pattern Selection

You can select a wipe pattern in the Wipe menu, or by entering a pattern number from the Flexi Pad control block.

For how to use the Flexi Pad control block, see “Selecting a wipe pattern in the Flexi Pad control block” (page 306).

Selecting a wipe pattern by a menu operation

Use the following procedure.

1 In the M/E-1>Wipe menu, select HF1 ‘Main Pattern.’ The Main Pattern menu appears.

304 Basic Procedure for Wipe Settings