Wipes 5 Chapter
To set the wipe position using the trackball or joystick
You can also set the wipe position using the trackball or joystick in the device control block. Use the following procedure.
1 In the device control block, press the [M/E1], [M/E2], [M/E3], or [P/P] button, turning it on.
The buttons in the device control block are assigned to the wipe position setting as follows.
|
| Table 1: Buttons and assigned settings | |
|
|
| |
Button name |
| Setting | |
|
|
|
|
K1 | CB1 |
| Wipe position for independent key 1 transition |
|
|
|
|
K2 | CB2 |
| Wipe position for independent key 2 transition |
|
|
|
|
K3 | FM1 |
| Wipe position for independent key 3 transition |
|
|
|
|
K4 | FM2 |
| Wipe position for independent key 4 transition |
|
|
|
|
|
| Table 2: Buttons assigned to functions | |
|
|
| |
Button name |
| Function | |
|
|
| |
POS |
| Toggle Position on or off. | |
|
|
| |
X, Y |
| Fix the operating direction, and enable setting of the wipe | |
|
|
| position from the numeric keypad. |
|
|
| |
CTR |
| Return the pattern position to the center of the screen. | |
|
|
|
|
2 Press one of the buttons in Table 1 above, to select the wipe position to which the operation applies. Multiple selection is possible.
3
4 Move the trackball or joystick, to set the wipe position. By pressing the [X] button, turning it on, you can restrict movement to the horizontal direction, and by pressing the [Y] button, turning it on, you can restrict movement to the vertical direction. Also, when either of these buttons is lit, you can enter a coordinate of the wipe position from the numeric keypad.
To set the wipe position by a menu operation
Use the following procedure.
1 Press [Position] in the Key1 Wipe Adjust menu, turning it on.
324 Wipe Settings for Independent Key Transitions