2 Select the desired DME wipe pattern group with one of the following buttons.

Slide/Squeeze: slide and squeeze

Split/Door: split and door

Flip/Tumble: flip tumble

Page Turn/Roll: page turn and page roll

Frame I/O: frame in/out

PIn P: picture-in-picture

User Program: user programmable DME

In two-channel mode, only Slide/Squeeze, P In P and User Program are selectable.

For details of DME wipe patterns, see “Types of DME Wipe Pattern” (page 68) and the appendix “DME Wipe Pattern List” (Volume 2).

The patterns from the selected pattern group appear on the screen.

3 Press the button to select the desired pattern.

Note

For a key transition, the page turn, page roll and picture-in-picture cannot be used.

Selecting a DME wipe pattern in the Flexi Pad control block

In the standard type Flexi Pad control block, enter a 4-digit pattern number, using the [DME] button.

For details, see “Selecting a wipe pattern in the Flexi Pad control block” (page 306).

Note

You cannot select a DME wipe pattern in the simple type Flexi Pad control block.

Setting DME Wipe Modifiers

You can apply various modifiers to the DME wipe pattern: setting the DME wipe direction, pattern position, and so on.

For an overview of the DME wipe modifiers, see “DME Wipe Pattern Variation and Modifiers” (page 70).

Wipes DME 6 Chapter

Basic Procedure for DME Wipe Settings 333