Sony 9000, DVS-9000 Key Setting Operations With the Key Control Block

Key Setting Operations With the Key Control Block

This section describes the basic procedures for key settings using the key control block.

					Key delegation buttons
M/E delegation buttons								Displays
Key type selection buttons								Knobs
M/E	M/E	M/E	P/P
1	2	3
					DME	DME	DME	DME
					1	2	3	4
KEY1	KEY2	KEY3	KEY4	TRANS
LUM	LIN	CRK	CVK	PTN
					DME	DME	DME	DME
					5	6	7	8
AUTO	SPLIT	MATTE	KEY	SOFT
SEL		FILL	DROP	EDGE
BDR	DROP	SHDW	OUT	EMBOS			MON	FM
	BDR		LINE					FEED
SHOW	MAIN	SUB	ZABTN	MORE	OVER	TRACE	PROC	AUTO
KEY	MASK	MASK			RIDE		KEY	DELEG

Key fill/key source selection buttons Edge type selection buttons

Key control block

Operations in the Key Control Block

Selecting the bank and keyer

To make key settings, first select the bank (from M/E-1 to M/E-3 and PGM/ PST) and keyer, then assign them to the key control block.

For example, to set key 1 on M/E-1 with the key control block, use the following procedure.

Keys 4 Chapter

Key Setting Operations With the Key Control Block 287