Carrying out a color mix for the key edge fill matte
When you select ‘Matte’ for the edge fill of a border, drop border, or shadow, you can create a combination of color 1 and color 2 using a wipe pattern generated by the dedicated pattern generator.
Use the following procedure.
1 | In the <Edge Fill> group of the Edge menu, select [Matte], then press | |||
| [Matte Adjust]. |
|
| |
| The edge fill Matte Adjust menu appears. |
| ||
2 | In the <Edge Matte> group, select [Mix Color], turning it on. | |||
3 | Adjust the following parameters. |
| ||
|
|
|
|
|
| Knob | Parameter | Adjustment | Setting values |
|
|
|
|
|
| 1 | Size | Pattern size | 0.00 to 100.00 |
|
|
|
|
|
| 2 | Softness | Softness of pattern edge | 0.00 to 100.00 |
|
|
|
|
|
| 3 | Pattern | Pattern number | 1 to 24 a) |
a)The patterns are the same as standard wipes. (For details, see the appendix “Wipe Pattern List” (Volume 2).)
To select the pattern, display the Mix Pattern Select menu by pressing [Mix Pattern] in the edge fill Matte Adjust menu. After selecting one of the patterns (standard wipe patterns 1 to 24) displayed in the Mix Pattern Select menu, you can adjust the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Size | Pattern size | 0.00 to 100.00 |
|
|
|
|
2 | Softness | Softness of pattern edge | 0.00 to 100.00 |
|
|
|
|
4 Adjust color 1 and color 2.
To adjust color 1 press [Color 1], and to adjust color 2 press [Color 2], turning it on respectively, and adjust the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Luminance | 0.00 to 100.00 |
|
|
|
|
2 | Saturation | Saturation | 0.00 to 100.00 |
|
|
|
|
3 | Hue | Hue | 359.99 to 0.00 |
|
|
|
|
5 If required, set the pattern modifiers.
Keys 4 Chapter
Key Setting Operations Using Menus 277