Wipes 5 Chapter

For an overview of the wipe modifiers, see “Wipe Pattern Variation and Modifiers” (page 59).

Note that the available modifiers may depend on the pattern you are using. For details, see “Possible combinations of wipe patterns and modifiers” (page 320).

Main pattern and sub pattern modifiers

You can make independent settings of the modifiers for the main pattern and sub pattern.

•To set the modifiers for the main pattern, in the M/E-1> Wipe menu, select HF5 ‘Main Modify,’ and make the settings in the Main Modify menu.

•To set the modifiers for the sub pattern, select HF6 ‘Sub Modify,’ and make the settings in the Sub Modify menu.

Operations in the Main Modify menu and Sub Modify menu are the same.

Independently set modifiers for the main pattern and sub pattern

•Positioner

•Rotation

•Aspect ratio

•Pattern replication (MULTI)

•Pairing

•Modulation

•Spring

•Spiral

The following sections show examples of modifying the main pattern.

Specifying the wipe direction (Direction)

You can specify the wipe direction (normal/reverse).

To specify the wipe direction in a menu

Use the following procedure.

1 In the M/E-1> Wipe menu, select HF4 ‘Edge/Direction.’

The Edge/Direction menu appears.

2 In the <Direction> group, specify the wipe direction.

Normal: regular direction

Normal/Reverse: alternate between regular and reverse for each transition

Reverse: reverse direction to normal

310 Basic Procedure for Wipe Settings