Memory Frame 7 Chapter

Note

When a pair setting is active, it is coupled to the video process on/off setting, but the above parameter settings are only valid for frame memory source bus 1. When setting video process for frame memory source bus 2, disable the pair setting. To set video process for frame memory source bus 1 only with the pair setting, return the frame memory source bus 2 settings to their default values.

Setting a mask

Masks can be set separately for frame memory source buses 1 and 2. To apply a mask to the signal selected on frame memory source bus 1, for example, use the following procedure in the Edit>Freeze menu.

1 Press [Box Mask] turning it on.

2 Use the knobs to adjust the following parameters.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Top

Top position

−100.00 to +100.00

 

 

 

 

2

Left

Left position

−100.00 to +100.00

 

 

 

 

3

Right

Right position

−100.00 to +100.00

 

 

 

 

4

Bottom

Bottom position

−100.00 to +100.00

 

 

 

 

3 To link the masks on frame memory source buses 1 and 2, press [Mask Link], turning it on.

Recalling Images

Using the thumbnail display to recall an image

To recall an image file saved in memory using the thumbnails, and assign it to an FM output, use the following procedure.

1 In the Frame Memory menu, select VF1 ‘Recall’ and HF1 ‘Recall Thumbnail.’

The Recall Thumbnail menu appears.

•When [Pair] is on, only pair files (pairs of main file and sub file) are displayed.

354 Frame Memory Operations