Wipes DME 6 Chapter

Creating User Programmable DME Patterns

With a user programmable DME, you can use DME effects created through the use of keyframes for a transition on the switcher system.

Note the following points when creating a keyframe effect for use as a user programmable DME pattern.

Register numbers and pattern numbers

When saving a keyframe effect as a user programmable DME pattern, specify the register number that corresponds to the pattern number as shown in the following table.

Execution mode

Register number

Pattern number

 

 

 

One-channel mode

101 to 199

1901 to 1999

 

 

 

Two-channel mode

201 to 299

2901 to 2999

 

 

 

For details of registers and keyframe effects, see “Registers” (page 125) and Chapter 13 “Keyframe Effects” (Volume 2), respectively.

Keyframe effects in the global channel

When the effect with the same number as the reference channel is present on the DME global (GLBL) channel, executing the user programmable DME will also execute the effect on the global channel simultaneously.

When executing a user programmable DME, take note of whether the effect is present on the global channel.

User Programmable DME Transition Mode

To create a user programmable DME, it is necessary to set the transition mode (the way in which the effect moves). To set the transition mode, use the Key Frame>DME User PGM menu.

342 Creating User Programmable DME Patterns