Memory Frame 7 Chapter

Frame Memory Operations

For an overview of frame memory concepts, see “Frame Memory” (page 73).

Preparations

Allocating the frame memory outputs (FM1 to FM8) to crosspoint buttons

To output a frame memory image to a monitor, for example, the output signal from the frame memory (FM1 to FM8) must be allocated to a cross-point button. Carry out this allocation in the Setup menu.

Accessing the Frame Memory menu

Most frame memory operations are carried out using the Frame Memory menu. To access the Frame Memory menu, use either of the following procedures.

•In the menu control block, select the top menu selection button [FRAME MEM].

•Press the cross-point button to which the frame memory output is allocated twice in rapid succession.

Interpreting the Frame Memory Menu

The menu screen consists of the following principal parts.

The status area display is the same for all except the Pattern Adjust/Pattern Select/File menus.

348 Frame Memory Operations