Wipes 5 Chapter
WIPE button
Numeric display
XPT HOLD
A B U1 U2 1 2 3 4
WIPE | 1 | 2 |
DME | 3 | 4 |
SNAP | 5 | 6 |
SHOT |
|
|
UNDO | 7 | 8 |
Memory recall buttons
UNDO button
Flexi Pad control block (simple type)
Saving a Wipe Snapshot
Saving a wipe snapshot
Use the following procedure.
1 Make the wipe settings that you want to save.
2 In the Flexi Pad control block, hold down the [WIPE] button, and press the memory recall button corresponding to the register in which you want to save.
Notes
•If you press a button which is lit orange or yellow, the existing contents of the register are overwritten.
•If you carry out a pattern mix, and both the main pattern and sub pattern are selected, then the memory recall button shows the main pattern.
328 Wipe Snapshots