Functions
For details of creating keyframe effects, see “Creating User Programmable DME Patterns” (page 342).
Notes
•To use the split, page turn, and page roll effects requires the
•Note that for an independent key transition, only the slide, split, squeeze, door, frame
Signals forming part of the background for a DME wipe
In
DME Wipe Pattern Variation and Modifiers
You can modify the selected DME wipe pattern in the same way as an ordinary wipe pattern, as follows.
For the setting operations, see “Setting DME Wipe Modifiers” (page 333).
Direction: You can set the DME wipe direction to normal, reverse, or alternating normal/reverse (page 59), except for a key transition, which is always in normal/reverse mode.
Border: You can apply a border or soft border (see page 60), except for DME wipes in the independent key transition control block with which this modifier cannot be used.
In the case of a user programmable DME pattern in which a border has already been applied to the effect, the behavior is as follows.
•When the DME wipe border setting is ON, only part of the border applied in the effect is enabled, and that portion can be adjusted.
•When the DME wipe border setting is OFF, the border applied in the effect is enabled as is.
Positioner: This can only be used when one of the following pattern numbers is selected.
1031, 1201 to 1204, 1251, 2651, 2652
With the progress of the transition, the center of the pattern automatically moves from its initially set position toward the center of the image (see page 61). That is to say, the same effect is obtained as in a normal wipe when the positioner is set to “AUTO CENTER.” Again, by using the position select function, you can move the pattern instantaneously.
70 DME Wipes