To specify the wipe direction with a button in the transition control block

In the transition control block of each of the M/E-1 to M/E-3 and PGM/PST banks, press the following direction selection buttons.

NORM: Normal

NORM/REV: Normal/reverse

REV: Reverse

Splitting the wipe pattern

Use the following procedure.

1 In the M/E-1 > Wipe menu, select HF4 ‘Edge/Direction.’

The Edge/Direction menu appears.

2 Press [Split], turning it on.

3 Set the following parameters.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Split No.

Number of splits

1 to 4 (integer)

 

 

 

 

2

Spacing

Spacing between adjacent

0.00 to 100.00

 

 

patterns

 

 

 

 

 

Modifying the wipe pattern edge

Use the following procedure.

1 In the M/E-1> Wipe menu, select HF4 ‘Edge/Direction.’ The Edge/Direction menu appears.

2 In the <Edge> group, select the edge type.

Border: border

Soft: soft edge

Soft Border: soft border

For an overview of the edge types, see “Edge” (page 60).

3 Set the parameters according to the selection in step 2.

• When border is selected

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Width

Border width

0.00 to 100.00

 

 

 

 

Wipes 5 Chapter

Basic Procedure for Wipe Settings

311