Keys 4 Chapter
Knob | Parameter | Setting values |
|
|
|
2 | Position | 359 to 0 |
|
|
|
4 | Density | 0 to 100 |
|
|
|
Selecting a normal edge
When all five edge type selection buttons are off, a normal edge is selected. If one of the buttons is lit, press it, turning it off.
Softening the edge
Press the [SOFT EDGE] button, turning it on. The button lights green, and you can now adjust the softness with the knob.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Soft | Edge softness | 0 to 100 |
|
|
|
|
•For a normal edge, when [SOFT EDGE] is enabled, “Key Drop” mode turns on.
•When a luminance key or linear key is selected as the key type, and clean mode is enabled, enabling [SOFT EDGE] ends the clean mode.
Applying the zabton effects
When the [ZABTN] button is lit green, adjust the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Size | Pattern size | 0 to 100 |
|
|
|
|
2 | Soft | Pattern edge softness | 0 to 100 |
|
|
|
|
Press the [MORE] button lit amber, changing it to green, then adjust the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Luminance | 0 to 100 |
|
|
|
|
2 | Saturation | Saturation | 0 to 100 |
|
|
|
|
3 | Hue | Hue | 359 to 0 |
|
|
|
|
4 | Density | Density | 0 to 100 |
|
|
|
|
294 Key Setting Operations With the Key Control Block