To adjust the horizontal position or key source width for a luminance key, linear key, or chroma key: Press [Key Position], turning it on, and set the parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | H Phase | Key horizontal position | −4.00 to +4.00 |
|
|
|
|
2 | Left | Key left edge position | −4.00 to +4.00 |
|
|
|
|
3 | Right | Key right edge position | −4.00 to +4.00 |
|
|
|
|
To set the key priority: Press [Key Priority] or select VF7 ‘Misc’ and HF3 ‘Key Priority’ to access the Key Priority menu.
For details, see “Setting the Key Priority by a Menu Operation” (page 229).
Chroma Key Composition
Composing an image by chroma keying
There are two types of composition for chroma keying: normal mix, and additive mix.
To carry out chroma key composition, use the following procedure.
For an overview of the chroma key composition, see page 47.
1 In the
It becomes possible to adjust the key density (see page 264).
3 Select [Chroma Adjust].
The Chroma Adjust menu appears.
4 Carry out auto chroma key adjustments.
Also carry out manual adjustments if necessary to obtain an optimum chroma key image.
For the adjustment procedures, see page 266.
5 In the <Mix Mode> group, select [Normal Mix] or [Additive Mix] depending on the desired type of chroma key composition.
Keys 4 Chapter
Key Setting Operations Using Menus 265