Effects Keyframe 13 Chapter
2 Press the button corresponding to the region you want to select, turning it on.
You can also press more than one button.
[M/E 1], [M/E 2], [M/E 3], [P/P]: These select the corresponding
[USER 1] to [USER 8]: These select the USER regions.
[DME 1] to [DME 4]: These select DME channels.
[DEV 1] to [DEV 12]: These select the regions DEV 1 to DEV 12, respectively.
[ALL]: This selects all valid regions.
[MASTR]: This selects the master timeline (see “Creating and Saving a Master Timeline” (page 145)).
Note
The regions that can be selected simultaneously are those assigned to the region selection buttons in the numeric keypad control block. (See “Assigning the region selection buttons in the numeric keypad control block” (page 210).)
It is not possible to select [MASTR] and other regions simultaneously. If selected simultaneously, the master timeline takes precedence.
The first button pressed lights green as the reference region, and any subsequently pressed buttons light amber.
For details of the precedence order for becoming the reference region, see “Regions and Registers” in Chapter 1 (Volume 1).
The display shows the name of the reference region, and the number of the last register recalled for this region.
3 Enter the number of the register you want to recall, using the numeric keypad.
To find an empty register, instead of entering a number, press the [.] (period) button. To search for an empty register common to all currently selectable regions, press the [.] button again.
To search for an empty register in the 100 range, press [1], [0], [0], [.] (period) in this order. Similarly, to search for an empty register in the 200 range, press [2], [0], [0], [.] (period).
The register number appears in the display. If the number is followed by a letter ‘e’ or ‘E’, this indicates the following.
e:The selected register is empty for the regions selected in step 2. E: The selected register is empty for all currently selectable regions.
116 Recalling a Register