Effects Keyframe 13 Chapter
Pause
To apply a pause to a keyframe, use the following procedure.
1 Press the [EDIT ENBL] button, turning it on.
2 Stop the effect on the keyframe to which you want to apply a pause.
3 Press the [PAUSE] button.
This applies a pause to the specified keyframe.
Keyframe Loop (Repeated Execution of a Specified Range)
By setting the range of the loop within the effect, and the number of loop executions, you can execute the loop range repeatedly.
Note
It is only possible to set one keyframe loop for each region.
Creating a new keyframe loop
To specify the loop range and loop count, carry out the following procedure.
1 Press the [EDIT ENBL] button, turning it on.
2 Stop the effect on the keyframe you want to make the first of the loop range (start point). (Here, by way of example, keyframe 2 is taken as the start point.)
3 Press the [KF LOOP] button in the keyframe control block, turning it on.
The numeric keypad control block display shows the start point keyframe number as follows.
FM 2 TO
The example shown means “from (keyframe) 2 to...,” where the end keyframe is to follow.
128 Creating and Editing Keyframes