Operations DME 11 Chapter
To make the tip of the swirl stardust
Use the following procedure.
1 Press [Pixel], turning it on.
2 Set the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Density | Degree to which image | 0.00 to 100.00 |
|
| disappears |
|
|
|
|
|
2 | Random | Trail type and amount of stardust | 0.00 to 100.00 |
|
|
|
|
To set the center position of the swirl
Use the following procedure.
1 Press [Position], turning it on.
2 Set the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | H | Horizontal center position of swirl | −8.000 to +8.000 |
|
|
|
|
2 | V | Vertical center position of swirl | −6.000 to +6.000 |
|
|
|
|
Melt settings
The Melt effect melts the image away from a specified part.
To apply the Melt effect
With the Melt menu displayed, use the following procedure.
1 In the <Direction> group, select the direction in which the image melts away.
Up: Melting occurs upward.
Down: Melting occurs downward.
2 To make transition settings, press [Transition] and set the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Transition | Degree of transition | 0.00 to 100.00 |
|
|
|
|
2 | Curve | Degree to which image stretches | 0.00 to 100.00 |
|
|
|
|
3 | Random | Degree of jaggies at melted part | 0.00 to 100.00 |
|
|
|
|
62 DME Special Effect Operations