Shotbox Register Editing

You can carry out the following editing on shotbox registers.

•Lock: Write-protect the contents of the register.

•Copy: Copy data from one register to another.

•Move: Move data from one register to another.

•Swap: Swap the contents of two registers.

•Delete: Delete the contents of a register.

•Name: Attach a name to a register.

The procedures for shotbox register editing are similar to the procedures described in “Effect Register Editing” (page 151). Unlike in effect register editing, however, it is not necessary to specify a region in shotbox register editing.

Utility/Shotbox 15 Chapter

Shotbox Register Editing 191