Effects Keyframe 13 Chapter

Duration Mode Setting

There are two keyframe duration modes: variable duration mode, and constant duration mode in which the effect duration is fixed. (See “Duration modes” in Chapter 1 (Volume 1).)

•To select variable duration mode, turn the [CONST DUR] button off.

•To select constant duration mode, press the [CONST DUR] button, turning it on.

Transition Mode Settings for User Programmable DME

To create an effect for user programmable DME, it is necessary to set the transition mode.

Setting the transition mode

Use the following procedure.

1 In the Key Frame menu, select HF4 ‘DME User PGM.’

The DME User PGM menu appears.

2 In the <Transition Mode> group, select the transition mode according to the DME wipe action.

Single: select single transition mode.

Dual: select dual transition mode.

Frame I/O: select frame in-out transition mode.

PIn P: select picture-in-picture transition mode.

For details of creating an effect for user programmable DME, see “Creating User Programmable DME Patterns” in Chapter 6 (Volume 1).

Note

Which DME channel is selected as the reference region (lit green) in the numeric keypad control block is reflected in the <Transition Mode> group display.

132 Creating and Editing Keyframes