Knob | Parameter | Adjustment | Setting values |
|
|
|
|
4 | Offset V | Amount of vertical offset of image | −4.000 to +4.000 |
|
| with mirrors fixed |
|
|
|
|
|
5 | Angle | Mirror angle | −8.000 to +8.000 |
|
|
|
|
To set the center position of original image
Use the following procedure.
1 Press [Position], turning it on.
2 Set the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | H | Horizontal original image center | −4.000 to +4.000 |
|
| position |
|
|
|
|
|
2 | V | Vertical original image center | −4.000 to +4.000 |
|
| position |
|
|
|
|
|
Kaleidoscope settings
The Kaleidoscope effect creates an image like a view into a kaleidoscope.
To apply the Kaleidoscope effect
With the Kaleidoscope menu displayed, set the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Number | Number of blocks | 0.00 to 100.00 |
|
|
|
|
2 | Phase | Angle of partition reference point | −8.000 to +8.000 |
|
|
|
|
3 | Offset H | Amount of horizontal offset | −4.000 to +4.000 |
|
|
|
|
4 | Offset V | Amount of vertical offset | −3.000 to +3.000 |
|
|
|
|
To reflect the kaleidoscope image as if in a mirror
Use the following procedure.
1 To reflect in the horizontal direction, press [Mirror H], turning it on.
2 To reflect in the vertical direction, press [Mirror V], turning it on.
To set the reflection position
Use the following procedure.
1 Press [Position], turning it on.
Operations DME 11 Chapter
DME Special Effect Operations 55