3 To make wave settings for melting part, press [Border] and set the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Amp | Amplitude of waves | 0.00 to 100.00 |
|
|
|
|
2 | Freq | Frequency of waves | 0.00 to 100.00 |
|
|
|
|
3 | Offset a) | Amount of wave phase offset | −16.000 to +16.000 |
4 | Speed b) | Direction and speed of waves | −100.00 to +100.00 |
5 | Slant | Slant of border | −100.00 to +100.00 |
|
|
|
|
a)Set when Lock is on.
b)Set when Lock is off.
To stop the waves in the melting part
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
To select the shape of the part beginning to melt
Press [Form] and set the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Form | Waveform | 1 to 8 a) |
a)1 (SINE): Sine wave
2 (PARABOLA): Parabola wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
7 (MELT1): Melting wave 1
8 (MELT2): Melting wave 2
To make the melting part stardust
Use the following procedure.
1 Press [Pixel], turning it on.
2 Set the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Density | Degree to which image | 0.00 to 100.00 |
|
| disappears |
|
|
|
|
|
2 | Random | Degree to which pixel positions | 0.00 to 100.00 |
|
| become more randomized |
|
|
| further from the center |
|
|
|
|
|
Operations DME 11 Chapter
DME Special Effect Operations 63