Flat Color: Use a flat color matte as source of the trail. You can set the following parameters with the knobs.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Luminance | 0.00 to 100.00 |
|
|
|
|
2 | Saturation | Saturation | 0.00 to 100.00 |
|
|
|
|
3 | Hue | Hue | 359.99 to 0.00 |
|
|
|
|
Hue Rotate: Use a color matte whose hue varies slightly with each frame for the trail of the afterimages. You can set the following parameters with the knobs.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Luminance | 0.00 to 100.00 |
|
|
|
|
2 | Saturation | Saturation | 0.00 to 100.00 |
|
|
|
|
3 | Hue Speed | Speed at which the hue | −12.00 to +12.00 |
|
| changes |
|
|
|
|
|
Erasing the afterimages that remain in memory whenever a keyframe is passed
Press [Trail Eraser], turning it on.
This erases the afterimages before another effect passes a keyframe, writing new afterimages.
Selecting the freeze timing
In the <Trail Freeze Timing> group, select the timing for freezing a trail.
Frame: freeze in frame units.
Field: freeze in field units.
Applying stardust trails
The trail dissolves slowly in a cloud of dust.
1 Press the [DUST] button, turning it on.
Operations DME 11 Chapter
DME Special Effect Operations 69