Selecting the transition mode of the independent key transition control block
To select the key transition mode, select any of the following in the <Key Transition> group of the Transition menu.
Same: The transition settings for the On and Off directions are the same.
Independ: The transition settings for the On and Off directions can be set separately.
Selecting the background transition
In the Transition menu, press [Bus Toggle], to switch between on and off. On:
Off: Bus fixed mode
For more details, see
Setting the split fader to be enabled or disabled
In the Transition menu, press [Split Fader] to switch between Enable and Disable. This setting is only valid when using a simple transition module with Bus Toggle set to Off.
Enable: When the fader lever is split, the split fader effect is enabled.
Disable: Even when the fader lever is split, the normal fader lever effect is obtained.
Enabling or disabling the
In the <FTB> group of the Transition menu, press the program output name to toggle between On and Off.
On: When the [FTB] button is pressed, a
Off: Even when the [FTB] button is pressed, no
Note
The PGM2 to PGM4 settings are only valid in Multi Program mode or DSK mode.
Setting a preset color mix
Use the following procedure.
1 In the Switcher>Transition menu, press [Preset Color Mix].
The Preset Color Mix menu appears.
Setup Engineering 16 Chapter
Setup Relating to Switcher Processor | 245 |
|
|