Sony 2, CCp-8000 manual 67

2 Adjust the following parameters.

Knob	Parameter	Adjustment	Setting values
1	Luminance	Luminance	0.00 to 100.00
2	Saturation	Saturation	0.00 to 100.00
3	Hue	Hue	359.99 to 0.00

Setting the bar shape of the shade area

When you select [Preset] in step 2 (see page 65) of the procedure “Applying the Lighting effect”, use the following procedure to set the bar shape of the shade area.

1 Turn [Shade Modify] on.

2 Adjust the following parameters.

Knob	Parameter	Adjustment	Setting values
1	X	X-value of bar center point	−16.00 to +16.00
4	Width	Width of bar	0.00 to 100.00
5	Soft	Softness of edges	0.00 to 100.00

Setting the color of the shade in the shade area

To set the color of the shade in the shade area, use the following procedure.

1 Turn [Shade Color] on.

2 Adjust the following parameters.

Knob	Parameter	Adjustment	Setting values
1	Luminance	Luminance	0.00 to 100.00
2	Saturation	Saturation	0.00 to 100.00
3	Hue	Hue	359.99 to 0.00

Trail Settings

This effect recursively freezes the input video at regular intervals so that a trail of afterimages is created.

Operations DME 11 Chapter

DME Special Effect Operations 67