Setup Relating to Operations From the Control Panel
Overall Control Panel Settings (Config Menu)
To carry out the overall control panel settings, use the Panel>Config menu.
To display the Config menu
In the Engineering Setup menu, select VF2 ‘Panel’ and HF1 ‘Config.’
The status area shows the “Bank numbers 1 to 4” (physical locations) of the operating banks, the allocated operating bank names, and whether or not operation is enabled.
Interchanging the operating bank order or disabling operation
Use the following procedure.
1 In the Panel>Config menu, select the Bank you want to set, using either of the following methods.
•Press directly on the status area display.
•Press the arrow keys to scroll the reverse video cursor.
•Turn the knob to make the setting.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Bank | Select the position of the operating bank | 1 to 4 |
|
| you want to set |
|
|
|
|
|
The Bank selection here indicates the physical position on the control panel, numbering from the top as the 1st Row, 2nd Row, 3rd Row, and 4th Row.
2 Select the operating bank that you want to assign to the selected Bank number in the <M/E Assign> group.
The status area shows the interchanged state of the operating banks.
Note
It is not possible to assign the same M/E logical bank to more than one physical bank. Be sure to make different M/E assignments.
Setup Engineering 16 Chapter
Setup Relating to Operations From the Control Panel | 205 |
|
|