As an example, to select a memory card, use the following procedure.
1 In the File menu, press the device selection indication above the file list (default is [HDD] (hard disk)).
(If [Memory Card] appears, then since the memory card is already selected, steps 1 and 2 are not necessary.)
A
2 Press [Memory Card].
This selects the memory card as the location holding the files.
3 To select a directory, in the device selection area, press [SYSTEM] (default setting).
If there are any directories on the memory card, a
To create a new directory, see “Creating a New Directory” (page 306).
4 Press the name of the directory you want to use.
This selects the specified directory on the memory card to be manipulated.
Saving Files
As an example, to save snapshot register data to hard disk or memory card, use the following procedure.
1
2
3 In the device selection area on the right, select [HDD] or [Memory Card], then select a directory.
See “Selecting a Device for Operations” (page 296).
4 Using any of the following methods, select the data to be saved, and the file in which to save it.
•To select all files within the list, press [All] below the list.
•To select multiple files, turn the knobs to select in the following ranges.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | List L | Select the first register whose data is to | 1 to 99 |
|
| be saved |
|
|
|
|
|
Files 17 Chapter
Operations on Individual Files 297