3 Using the numeric keypad in the numeric keypad control block, enter the timecode value for the effect duration, as a maximum of six digits.
For example, to set 3 minutes 7 seconds and 15 frames, enter 30715. You can also use the [TRIM] button to enter a difference value. (See “To enter a difference value” (page 119).
4 Press the [ENTER] button.
This changes the effect duration to the new setting.
Note
In addition to the above operation, the effect duration may also be changed as a result of inserting or deleting keyframes. See “Time Settings” in Chapter 1 (Volume 1).
Setting the Delay
To set the delay (see “Time Settings” in chapter 1 (Volume 1)), use the following procedure.
1 Press the [EDIT ENBL] button, turning it on.
2 Press the [DELAY] button, turning it on.
The display in the numeric keypad control block shows “DELAY” followed by the delay time (seconds:frames).
3 Using the numeric keypad in the numeric keypad control block, enter the timecode value for the delay, as a maximum of four digits.
You can also use the [TRIM] button to enter a difference value. (See “To enter a difference value” (page 119).)
4 Press the [ENTER] button to confirm the entry.
This changes the delay setting.
Effects Keyframe 13 Chapter
Time Settings 135