Effects Keyframe 13 Chapter
2 Press the region display in the upper part of the list to display a selection window, then select the region in the selection window. Selecting multiple regions is also possible.
3 Press [OK].
The selected region name appears in the upper part of the list.
4 Using either of the following methods, select the register.
• | Press directly on the list in the status area. |
| ||
• | Press the arrow keys to scroll the reverse video cursor. | |||
• | Turn the knobs to make the setting. |
| ||
|
|
|
| |
Knob | Parameter | Adjustment | Setting values | |
|
|
|
|
|
1 |
| Register | Register number | 1 to 99 |
|
|
|
|
|
3 |
| Num | Select number of registers | 1 to 99 |
|
|
|
|
|
• | To select all registers, press [All]. |
| ||
5 Press [Lock],
Copying, moving, and swapping effect register data
This section describes the procedure for copying. You can move or swap registers using a similar procedure.
1 In the Effect menu, press VF2 ‘Effect’ and HF3 ‘Copy/Merge.’
•The Copy/Merge menu appears.
•The left side of the status area shows the register number of the copy source, and the right side shows the register number of the copy destination.
2 Press the region display in the upper part of the list to display a selection window, then select the region in the selection window. Selecting multiple regions is also possible.
Operation between regions
Operation between regions is possible in the following cases.
•Two of the
•Two of the USER1 to 8 regions of the same configuration
•Two of the DME1 to 4 (including Global) regions
3 Press [OK].
The selected region name appears in the upper part of the list.
152 Register Operations in the Menus