For an illustration of signal inversion, see “DME Special Effects” in Chapter 1 (Volume 1).

Applying the Invert effect

Use the following procedure.

1 In the DME menu, select VF6 ‘Input/Output’ and HF2 ‘Video/Key.’

The Video/Key menu appears.

2 In the <Front> group (to invert front signals) or the <Back> (to invert back signals), press the following buttons, turning them on.

H Invert: Invert video and key signals horizontally.

V Invert: Invert video and key signals vertically.

Key Density Settings

For the selected key, you can separately set the key density.

Setting the key density

Use the following procedure.

1 In the DME menu, select VF6 ‘Input/Output’ and HF2 ‘Video/Key.’

The Video/Key menu appears.

2 Press [Key Density], turning it on.

This enables the key density function, and you can now use the knobs to adjust the parameters.

3 Set the following parameter.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Key Density

Key density

0.00 to 100.00

 

 

 

 

Key Source Selection

Select the key signals for use as the front and back of the image.

Operations DME 11 Chapter

DME Special Effect Operations 75