4 In the <Decay Mix Mode> group, select the way in which the video signal is blurred.
Soft: mix the live image with the afterimage.
Hard: show the lighter of the live image and afterimage.
5 To erase the afterimage, press [Decay Eraser], turning it on.
To erase the afterimage from memory each time a keyframe is passed
Press [Decay Eraser], turning it on.
When the effect passes a keyframe, the afterimage is erased before writing a new afterimage.
Selecting the freeze timing
In the <Decay Freeze Timing> group, select the timing for motion decay freezing.
Frame: freeze in frame units.
Field: freeze in field units.
Applying stardust to the afterimage portion
The afterimage portion becomes stardust, and gradually disappears.
1 Press the [DUST] button, turning it on.
2 Set the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Decay Dust | Amount of the afterimage | 0.00 to 100.00 |
|
| disappearing as stardust a) |
|
2 | Dust Soft | Timing with which stardust | 0.00 to 100.00 |
|
| disappears |
|
|
|
|
|
3 | Dust Size | Size of stardust | 0.00 to 100.00 |
|
|
|
|
4 | Dust Aspect | Aspect ratio of stardust | |
|
|
|
|
a)The way in which the afterimage disappears is affected by both the Video Decay and Decay Dust parameter adjustments for the motion decay.
Keyframe Strobe Settings
Each time a keyframe is passed, the video image is frozen, and left remaining.
Operations DME 11 Chapter
DME Special Effect Operations 71